CALL (321) 466-0066 NOW

Powered Swing Door Operators

Automated Swing Doors That Make Every Entrance Effortlessly Accessible

Automated swing doors turn an ordinary hinged leaf into a powered, accessible, touch free entrance, without rebuilding the frame. It is the fastest, most cost effective route to a genuinely inclusive building.

1 DayTypical Retrofit
100%Force Tested
24/7Emergency Cover
Automated Swing Doors installed and serviced by Go Pro Garage Door Service
Certified Engineers

Safety forces measured and documented at every handover.

24/7 Emergency

Priority attendance with stocked genuine parts on board.

Retrofit Intelligence: Power The Door You Already Have

Most buildings do not need new openings, they need existing ones to work for everybody. A powered swing operator delivers that in hours, adding assisted opening, touchless activation and controlled closing to a door already in place.

The engineering sits in the detail. Leaf mass, hinge wear, frame stiffness, draught pressure and floor fall all affect the torque curve, so we survey each opening individually rather than fitting the same operator everywhere.

We then measure opening force, closing force and hold open time with calibrated equipment, adjust until every value sits inside accessible entrance guidance, and hand you the written results for your compliance records.

Our Services

Automated Swing Door Services We Deliver

Single leaves, double leaves, hygiene critical rooms and heritage facades, each with its own operator strategy.

Single Leaf Powered Operators installed by Go Pro Garage Door Service
Fast Retrofit

Most single leaf conversions are completed within one working day.

01

Single Leaf Powered Operators

A single leaf automated swing door is the workhorse of accessible design, serving offices, restrooms, consulting rooms and apartment entrances with quiet assisted opening on demand.

We match operator torque to leaf weight and draught conditions, then tune back check so the door never slams into an adjacent wall even when the building is under pressure.

Synchronised Double Leaf Entrances installed by Go Pro Garage Door Service
Sequenced Closing

Linked controllers keep both leaves in step, protecting seals and hardware.

02

Synchronised Double Leaf Entrances

Double leaf automated swing doors need sequenced control so the inactive leaf always clears before the active leaf closes onto the astragal or the rebate.

Our controllers link both operators, stagger the timing precisely and hold the pair in step, giving corridors and lobbies a wide, coordinated and reassuringly quiet opening.

Touchless And Hygienic Activation installed by Go Pro Garage Door Service
Touch Free

Wave, foot and proximity activation for infection sensitive environments.

03

Touchless And Hygienic Activation

Wave sensors, microwave heads and foot activation let visitors open automated swing doors without touching anything, which matters enormously in clinical, laboratory and food handling environments.

We position activation devices at accessible heights, shield them against accidental triggering, and pair them with access control so hygiene never compromises security.

Make Your Doors Accessible In A Single Visit

Tell us how many leaves you need powered. We will survey, quote a fixed price and complete most retrofits without closing your building.

Heritage And Concealed Operator Installations installed by Go Pro Garage Door Service
Invisible Engineering

Transom concealed drives that preserve original entrance appearance.

04

Heritage And Concealed Operator Installations

Where appearance is protected, concealed transom operators automate heavy timber and glazed doors while keeping the visible entrance exactly as the architect intended.

We plan cable routes, reinforcement and service access carefully in advance, so future maintenance never requires disturbing finished joinery or historic fabric.

By The Numbers

Proven Across Thousands Of Entrances

6,400 Doors Installed & Serviced
18 Years Of Field Experience
98% First Visit Fix Rate
60 Minute Emergency Response
Why Go Pro

Why Facilities Teams Trust Our Automated Swing Doors

Calibrated Force Testing

Opening and closing forces are measured with a gauge and documented, not estimated.

Frame First Surveying

Hinges, frames and floor levels are checked before automation, protecting the new operator.

Safety Sensor Coverage

Swing path and hinge side protection prevent both contact and finger trap injuries.

Low Disruption Fitting

Most retrofits complete in a day, out of hours if your operation needs it.

Access Control Ready

Card readers, intercoms and fire alarm interfaces are integrated at commissioning.

Maintainable Design

Operators are installed with clear service access so future visits stay quick and clean.

Client Feedback

Rated 4.9 By Facilities Teams And Homeowners

★★★★★
“Our main entrance had failed twice in one winter. Go Pro surveyed it properly, explained exactly what was wrong and rebuilt the system. Eighteen months on we have not logged a single fault.”
Marcus D.Facilities Director, Corporate Campus
★★★★★
“Accessibility compliance was our worry. They measured every force, documented the results and handed us a folder our inspector accepted without a single question. Genuinely professional from survey to sign off.”
Priya S.Operations Manager, Private Clinic
★★★★★
“Fourteen stores, one contractor, zero drama. Installations ran overnight, the entrances look superb, and their planned maintenance has cut our emergency callouts by more than half across the whole portfolio.”
Daniel K.Retail Estate Manager
★★★★★
“The lobby feels calmer and warmer since the new entrance went in, and guests notice how quiet it is. The engineers were immaculate, on time, and left the site cleaner than they found it.”
Elena R.Hotel General Manager
Questions

Automated Swing Doors FAQs

Straight answers from the engineers who install and service these systems every day.

Ask Our Team

Most can, provided the leaf is sound, the hinges are serviceable and the frame is rigid enough to carry the operator. We survey leaf weight, alignment and floor clearance first, and recommend any remedial work needed before the drive is fitted.

A low energy operator opens slowly and gently enough that additional guarding is not normally required, which suits internal doors activated by a push plate or wave sensor. Full power operators move faster and are paired with presence sensors instead.

We combine presence sensors covering the swing path, hinge side protection against finger traps, obstruction detection that reverses the leaf, and forces measured below accessible entrance limits. Every value is verified at handover and rechecked at each service.

Yes. Our operators revert to manual mode, closing under spring pressure so fire compartmentation is maintained and the door can still be pushed open by hand. Battery backup can be added where continuous powered operation is essential.

Absolutely. Card readers, keypads, intercoms and building management systems can all release the operator, and fire alarm interfaces can be configured to hold doors open or close them automatically according to your fire strategy.

A typical single leaf retrofit takes four to six hours including cabling, activation devices, programming and safety testing. Synchronised double leaf entrances usually take a full day, and concealed heritage installations are programmed individually.

Correctly specified operators are very quiet. Noise almost always comes from worn hinges, a misaligned leaf or a torque setting fighting draught pressure. We correct the mechanical cause rather than masking it by slowing the door down.

Twice a year suits most internal doors, while high traffic clinical and public entrances benefit from quarterly attention. Servicing covers force measurement, sensor testing, hinge and closer condition, fixings, programming review and a written report.
Contact Us

Talk To An Automated Door Engineer Today

Tell us about your opening, your traffic and your timeline. We respond the same working day with clear advice and a fixed price path forward.