Automated Revolving Doors For A Sealed, Silent, Signature Arrival
Automated revolving doors keep one quadrant permanently closed, so conditioned air, quiet and comfort stay inside while people flow continuously in both directions. It is the most efficient grand entrance a building can own.
Safety forces measured and documented at every handover.
Priority attendance with stocked genuine parts on board.
An Airlock, A Statement Piece And A Safety System In One Assembly
A revolving drum is the most mechanically complex entrance in any building. Canopy drive, shaft bearings, wing seals, safety sensors and control logic must all agree, or the door either feels heavy underhand or stops far too often.
We commission each drum by measuring rotation torque, walk testing every sensor zone, timing the slow down profile and confirming the push mode effort a visitor actually feels at the wing before we release the entrance to the public.
The payoff is an arrival that flatters the architecture and quietly pays for itself, because the airlock effect keeps heating and cooling inside the lobby instead of spilling it onto the pavement every time the building is busy.
Automated Revolving Door Services We Provide
Drum sizing, configuration, security integration and lifetime maintenance, all delivered by the same engineering team.
Correctly sized drums move over 2,000 people per hour comfortably.
Three And Four Wing Revolving Drums
Four wing automated revolving doors maximise the airlock seal and suit climate critical lobbies, while three wing drums move larger items and higher volumes of luggage with noticeably greater ease.
We model your footfall, baggage profile and accessibility duty before recommending a configuration, so the drum you install matches the way your building is genuinely used.
Feature lighting and glazing engineered into the canopy, not bolted on.
Large Diameter Showcase Entrances
Large diameter automated revolving doors turn a lobby threshold into architecture, carrying integrated lighting, feature glazing and a canopy detail that frames the brand behind it.
Our engineers manage the additional mass with reinforced shaft bearings, higher torque drives and extended slow down zones so a wide drum still feels light and unhurried.
Slow mode plus a linked powered pass door for full step free entry.
Low Energy And Accessible Push Modes
Automatic revolving doors must also serve visitors who need more time, so we programme a slow accessible rotation that any user can trigger from a clearly marked activation plate.
Where a step free alternative is required, we integrate an adjacent powered swing or sliding leaf and link both systems to one control panel for simple daily operation.
Plan Your Revolving Entrance With Our Engineers
Share your lobby drawings and expected footfall. We will return drum sizing options, throughput modelling and a fixed installation programme.
Wings park closed with monitored locking and access control handover.
Night Security And Access Integration
Out of hours, automated revolving doors can park their wings into a secure closed position and hand entry control to card readers, intercoms or your building management system.
We integrate monitored locking, tamper alerts and scheduled programme changes so the entrance secures itself reliably without depending on somebody remembering a switch.
Proven Across Thousands Of Entrances
Why Our Automated Revolving Doors Keep Turning Reliably
Torque Measured Commissioning
Rotation effort is measured, not guessed, so the drum never feels heavy underhand.
Full Zone Sensor Testing
Canopy, shaft, leading edge and floor sensors are walk tested and logged individually.
Sealed Wing Detailing
Brush and gasket seals are set to preserve the airlock without adding drag to rotation.
Integrated Security
Night locking, access control and BMS signals are commissioned as one coherent system.
Planned Bearing Care
Shaft and canopy bearings are inspected on schedule, preventing the noisiest failure mode.
Documented Compliance
Every safety test result is recorded and handed to your facilities team after each visit.
Rated 4.9 By Facilities Teams And Homeowners
“Our main entrance had failed twice in one winter. Go Pro surveyed it properly, explained exactly what was wrong and rebuilt the system. Eighteen months on we have not logged a single fault.”
“Accessibility compliance was our worry. They measured every force, documented the results and handed us a folder our inspector accepted without a single question. Genuinely professional from survey to sign off.”
“Fourteen stores, one contractor, zero drama. Installations ran overnight, the entrances look superb, and their planned maintenance has cut our emergency callouts by more than half across the whole portfolio.”
“The lobby feels calmer and warmer since the new entrance went in, and guests notice how quiet it is. The engineers were immaculate, on time, and left the site cleaner than they found it.”
Automated Revolving Doors FAQs
Straight answers from the engineers who install and service these systems every day.
Ask Our TeamTalk To An Automated Door Engineer Today
Tell us about your opening, your traffic and your timeline. We respond the same working day with clear advice and a fixed price path forward.
- Phone(000) 000-0000
- Emailinfo@goprogaragedoorservice.com
- HoursMon–Sat 7am–8pm · 24/7 Emergency Line