Categories
Blog

Why Regular Garage Door Maintenance Is Essential for Home Safety and Savings

Why Regular Garage Door Maintenance Is Essential for Home Safety and Savings

Your garage door is one of the most frequently used entryways to your home—and yet, it’s often the most neglected. Whether you’re using it for daily vehicle access, extra storage, or even as a workshop entrance, a malfunctioning garage door can quickly become a safety hazard and a financial drain.

At [Your Company Name], we specialize in garage door installation, repair, and maintenance, and we’ve seen it all—from doors stuck halfway open to full replacements that could’ve been avoided with a bit of preventive care.

Common Garage Door Issues We See

  1. Broken Springs or Cables
    These are some of the most common and dangerous problems. Springs and cables hold a lot of tension and can cause serious injury if they snap.

  2. Noisy Operation
    Grinding, squeaking, or rattling can indicate loose hardware, worn rollers, or the need for lubrication.

  3. Remote Control or Sensor Failure
    Sometimes the issue is as simple as a dead battery, but other times it’s a faulty sensor or wiring that needs attention.

  4. Off-Track Doors
    When a garage door comes off its tracks, it may no longer close properly, leaving your home vulnerable.

Why Regular Maintenance Matters

  • Safety First: A malfunctioning door can cause injury to you, your family, or your vehicle. Regular checks help catch issues before they become dangerous.

  • Save Money: Routine maintenance is far cheaper than major repairs or a full replacement.

  • Improve Curb Appeal: A well-functioning, clean garage door enhances your home’s appearance and value.

  • Increase Lifespan: Just like any mechanical system, the better it’s maintained, the longer it lasts.

Categories
Blog

Signs It’s Time to Replace Your Garage Door Panels

Blog

Broken Springs & Panels: Signs It's Time to Replace Your Garage Door Panels

Your garage door is made up of several vital parts working together—but when one piece fails, it can put stress on the entire system. One common issue that often goes hand in hand with structural damage is broken garage door springs or damaged door panels. If you’re noticing strange noises, a crooked door, or visible wear, it may be time to take action.

Below, we break down the key signs it’s time to replace your garage door panels, especially when broken springs are involved, and why prompt repair matters.

The Door Looks Crooked or Uneven

If one of your springs has snapped, the tension becomes unbalanced. This can cause your door to sit crooked or shift unevenly when opening or closing. When this continues over time, it puts excess strain on specific panels, potentially bending or warping them.

What to watch for:

  • One side of the door is lower

  • The door “jerks” or “sticks” in certain spots

  • Panels begin to flex under pressure

Panels Are Cracked, Bent, or Warped

Physical damage to panels—such as dents from a car bump, weather damage, or long-term stress from broken springs—can weaken their structural integrity.

Signs of panel damage:

  • Deep creases or bending across the surface

  • Cracks at the edges or corners of the panel

  • Visible gaps between panel seams

Tip: One damaged panel might be replaceable, but multiple broken ones often require a full panel set or door replacement.

Noisy Operation or Scraping Sounds

Broken springs can cause the door to drag or misalign as it moves, leading to friction between the panels and the track. If you’re hearing grinding, scraping, or popping noises during operation, it’s a red flag.

What’s happening:

  • A misaligned door rubs against the frame or track

  • Warped panels shift unnaturally under load

  • Loud noises signal deeper issues with springs or tracks

Poor Insulation or Weather Protection

If your garage door panels are cracked or separated, they may not properly seal against the elements. Damaged panels allow cold air, water, and pests inside—especially when the spring system is no longer holding the door flush against the frame.

Results:

  • Drafts and temperature swings in the garage

  • Higher energy bills if the garage is attached to the home

  • Water damage or rust around door edges

The Door Doesn't Open or Close Smoothly

Broken springs and damaged panels often go hand in hand with mechanical trouble. If your opener struggles to lift the door—or the door won’t open at all—there could be structural resistance from panel damage.

If you notice:

  • Door won’t open fully or gets stuck halfway

  • Sudden reversals when closing

  • Loud bangs (a typical sign of a broken torsion spring)

It’s time for a professional inspection.

Why You Shouldn't Wait

Delaying panel replacement after a spring breaks can:

  • Make the door unsafe to operate

  • Add stress to the motor and opener

  • Increase the risk of full system failure

  • Lead to a more costly full-door replacement later

What to Do Next

If you suspect your garage door springs are broken and your panels are showing wear or damage:

  • Stop using the door immediately to avoid further harm

  • Call a licensed garage door technician to inspect the springs, track alignment, and panel integrity

  • Consider replacing the damaged panels or the entire door depending on the extent of wear


Categories
Blog

Maximizing the Lifespan of Your Garage Door Springs

Blog

Maximizing the Lifespan of Your Garage Door Springs

Garage door springs are the unsung heroes of your garage door system, doing the heavy lifting every time you open or close the door. Although they’re built to last thousands of cycles, proper care and maintenance can significantly extend their lifespan—and save you from unexpected breakdowns or costly repairs.

Whether your garage uses torsion springs or extension springs, the following tips will help you keep them functioning safely and efficiently for years to come.

Understand Your Springs’ Lifecycle

Most garage door springs are rated for a certain number of cycles—one cycle equals one open and one close. On average:

  • Standard springs: 10,000 cycles (approx. 7–10 years with moderate use)

  • High-cycle springs: 20,000–25,000 cycles

The more you use your garage door daily, the quicker those cycles add up. Daily users (2+ cycles a day) may benefit from upgrading to high-cycle springs.

Schedule Routine Maintenance

Preventive maintenance is the #1 way to extend the life of your springs. Here’s what to do every 6–12 months:

  • Lubricate springs with a non-silicone, garage door-specific lubricant to prevent rust and friction

  • Inspect for rust or corrosion—springs are under high tension and corrosion weakens their integrity

  • Listen for unusual noises like squeaks, grinding, or banging sounds

  • Check the balance of your door—disconnect the opener and manually lift the door. If it doesn’t stay halfway open, your springs may be wearing out

Keep the System in Balance

When garage doors are misaligned or off-balance, springs have to work harder to compensate, accelerating wear. A properly balanced door should:

  • Open and close smoothly without jerking

  • Stay in place when lifted halfway manually

  • Not put too much strain on the opener

If balance is off, call a professional to make the adjustments safely.

Protect Against Moisture and Corrosion

Garage door springs are often exposed to moisture, especially in humid or rainy climates. To prevent rust:

  • Apply a corrosion-resistant lubricant regularly

  • Inspect the garage for leaks or condensation

  • Consider powder-coated springs, which offer better resistance to rust

Don’t DIY Spring Repairs

Garage door springs are under extreme tension and can cause serious injury if handled improperly. If your spring breaks or shows signs of significant wear (gaps in the coils, excessive noise, sagging), always contact a trained technician.

Attempting DIY spring replacement is not only dangerous—it can also void your warranty.

Upgrade When Necessary

If your garage door is older or if you frequently open/close it throughout the day, consider:

  • Upgrading to high-cycle springs

  • Installing dual-spring systems (common in larger doors) to reduce load on each spring

  • Switching from extension to torsion springs for better control and longer life

Conclusion: A Small Effort for a Big Return

Garage door springs don’t last forever, but with proper care and routine attention, you can maximize their lifespan, avoid emergencies, and keep your garage door running safely and smoothly.

Need a spring checkup or professional service? Contact your local garage door experts today for a tune-up or spring upgrade consultation. Regular care now can prevent major issues later!

Categories
Blog

Cost-Effective Garage Door Upgrades with Big Impact

Blog

Add or Replace Garage Door Windows

Why it matters: Adding windows gives your garage door a modern, custom look and lets in natural light. If your current door already has windows, consider upgrading to decorative or frosted glass for a stylish refresh.

Bonus: Energy-efficient window inserts can help reduce heat loss.

Repaint or Refinish the Door

Why it matters: A fresh coat of paint or stain can completely transform the look of your garage door and boost your home’s curb appeal. Stick with neutral tones or coordinate with your home’s trim for a clean, cohesive appearance.

Tip: Use exterior-grade paint and prep the surface properly for long-lasting results.

Install Decorative Hardware

Why it matters: Magnetic or screw-on handles, hinges, and faux straps can give a plain garage door a carriage-style or rustic charm look at a fraction of the price of a full door replacement.

Fast and simple: Most kits are DIY-friendly and require no drilling.

Upgrade to a Smart Garage Door Opener

Why it matters: Smart openers add both convenience and security. Control your garage door from your smartphone, get alerts when it opens, and even integrate with Amazon Key for secure package delivery.

Popular options: Chamberlain MyQ, LiftMaster, Genie Aladdin Connect.

Replace Worn-Out Weatherstripping

Why it matters: Replacing the bottom seal or perimeter weatherstripping helps keep out cold air, rain, pests, and noise—improving both comfort and energy efficiency.

Easy DIY: Most weather seals can be replaced in under an hour with minimal tools.

Deep Clean and Lubricate Moving Parts

Why it matters: A clean, well-lubricated garage door runs quieter and lasts longer. Clean the tracks, wipe down the door, and lubricate hinges, springs, and rollers with a silicone-based spray.

Maintenance tip: Do this every 6–12 months to avoid costly repairs.

Install Garage Door Insulation Panels

Why it matters: Insulated garage doors help regulate interior temperature, reduce outside noise, and can even improve energy bills. Kits are available at most hardware stores and can be installed in a few hours.

Great for: Attached garages, homes in hot or cold climates, or if your garage doubles as a workspace.

Categories
Blog Our Services

Garage Door Cable Repair

Our Services

Garage Door Cable Repair

Garage Door Cable Repair

Garage door cables are under significant tension, and mishandling them can result in serious injuries. Additionally, improper repairs may lead to further damage or void warranties on your garage door system. Professional technicians have the tools, expertise, and experience needed to safely and effectively replace garage door cables. They can also inspect the entire system to ensure there are no underlying issues that could cause future problems.

Do you know how vital your garage door cables are? Well, let’s give you an idea. Those cable drums at both sides of your door

Release the Tension in the Spring

Use winding bars to slowly unwind the torsion spring. This is the most dangerous part. If you’re unsure, stop and call a pro.

Remove the Old Cable

Loosen the set screws on the cable drum. Pull out the old, frayed, or broken cable.

Install the New Cable

Hook the new cable to the bottom bracket on the door. Run it up the door track and around the cable drum.

Release the Tension in the Spring

Use winding bars to slowly unwind the torsion spring. This is the most dangerous part. If you’re unsure, stop and call a pro.

Test the Door

Remove the clamps or locking pliers. Plug in the opener. Manually lift the door halfway. It should stay balanced if the tension is right.

The process is slightly different, typically involving less spring tension directly at the cable location. Let me know if you have this type, and I can tailor the steps.
Categories
Blog Our Services

Garage Door Installation

Our Services

Fast Garage Repair Services

Garage Door Installation

Garage door cables are under significant tension, and mishandling them can result in serious injuries. Additionally, improper repairs may lead to further damage or void warranties on your garage door system. Professional technicians have the tools, expertise, and experience needed to safely and effectively replace garage door cables. They can also inspect the entire system to ensure there are no underlying issues that could cause future problems.

For your garage door installs in Long Beach, there’s only one company to call. Jordan’s Overhead Garage Door Service employs only experts.

Prepare the Opening

Ensure the frame is plumb and level. Check header height and side clearance for tracks and opener.

Install Bottom Panel

Center it in the door opening. Secure brackets and hinges. Insert rollers into side hinges.

Add Remaining Panels

Stack and attach the next panels using hinges. Insert rollers into hinges and guide them into the track.

Install Tracks

Attach vertical tracks to the jambs on each side. Connect horizontal tracks with curved segments (track radius).

Attach Lifting Cables

Connect cables to bottom brackets. Run them through drums (torsion) or pulleys (extension).

Fast, Reliable Garage Door Installation in Your Area

Looking for professional Garage Door Installation in Orlando, FL? Homeowners living nearby can get quick, inexpensive and dependable door solutions from Go Pro Garage Door Service. We ensure your garage door carries out its role nicely and looks clean by choosing the best brands and materials.

 

Next-Day Garage Door Installation You Can Count On

Need to have your garage door set up without wasting time? Fast Next Day Garage Door Installation is what we do to make sure your time is well spent. For every project, we work hard to finish your job quickly and with excellent results.

 

Trusted Local Experts in Winter Park

Our team carefully installs every garage door in Winter Park, FL. Measuring, planning, installing and cleaning everything up is done with no fuss, just top-notch service by us.

 

Expert Solutions in Doctor Philips and Beyond

Residents trust us for quality Garage Door Installation in Doctor Philips, FL. We understand local needs and property styles, offering custom-fit options with a personal touch.

 

Serving Apopka, Clermont, Casselberry & More

We proudly provide Garage Door Installation in Apopka, FL, Clermont, FL, Casselberry, FL, and Lake Marry, FL, ensuring quick service and long-lasting performance. We’re also your go-to Garage Door Installation & Repair Company across Florida.

 

Need Garage Door Repair in Florida? We’re just a call away from fast fixes and fair prices.

 

Your Reliable Garage Door Team

Go Pro Garage Door Service stands for honesty, quality work, and fast turnarounds. We’re here to make your door installation experience simple and stress-free.

Replace old springs, cables, and drums when installing a new door. If installing a double garage door, always use two torsion springs.
Categories
Blog Our Services

Garage Door Tune-up

Our Services

Garage Door Tune-up

Garage Door Tune-up

With the door closing, wave an object in front of the sensors — the door should reverse. If it doesn’t, clean the sensors and align them until the lights stay solid Try stopping the door mid-close — it should reverse easily with resistance. Adjust opener force/sensitivity if needed (consult your opener manual).

Just like your car and home require regular maintenance, so does your garage door. Unfortunately, most people neglect just how important this feature is.

Check Auto-Reverse Feature

Place a piece of wood or object in the door’s path and close the door. Door should automatically reverse when it hits the object.

Clean Tracks

Wipe down inside of tracks with a damp cloth. Remove debris, spiderwebs, or buildup that may cause jams.

Inspect Weatherstripping

Check bottom rubber seal and side seals. Replace if cracked, brittle, or missing to keep out water and pests.

Check Rollers

Worn, cracked, or wobbly rollers should be replaced. Nylon rollers are quieter; steel ones last longer.

Examine Cables

Look for fraying or rust near the bottom brackets. Don’t touch cables — under high tension. Call a pro if damaged.

If it doesn’t, clean the sensors and align them until the lights stay solid. Pull the emergency release cord and test door movement by hand — it should glide smoothly.

Book Appointment

Book Appointment